D-TEK® Select Refrigerant Leak Detector
This next-generation D-TEK® Select Refrigerant Leak Detector (SF6 Sulfur Hexafluoride) uses an innovative infrared absorption sensing cell that is extremely sensitive to all refrigerants—and only refrigerants.
- The D-TEK Refrigerant Leak Detector provides 1000+ hours of sensor life for the low cost of ownership
- The infrared cell does not weaken over time, so response remains consistent and accurate
- Detects R22, R134a, R404a, R410a, R448a, R507 (AZ-50), R32, HFO1234yf, SF6, and all other CFCs, HCFCs, HFCs, and HFOs
- High-efficiency air sampling pump provides quick response and quick clearing (“zeroing”)
IRwin® Methane Leak Detector
The Irwin natural gas detector has the following key differentiators from our competitors:
- Intrinsically Safe
- Bluetooth interface to download the survey results to a laptop or other compatible device.
- Built-in Integrated GPS for tracking your surveys with the date and time stamp
- Chromatography Analysis – Ability to differentiators between natural gas and swamp gas (Ethane and Methane Analysis)
- Durable design for tough environments
GMP02
The GMP02 is a portable gas detection camera. The camera system enables visualization and recording of hydrocarbon gases, along with associated data of inspection conditions and operational data.
- High Detectability: Unique image processing and noise reduction
- Portable and Ergonomic
- Wireless Smart Device Connectivity
- Data management service
- Unique and Patented Gas Plume Quantification
- User-friendly interface
- Regulatory compliance (EPA OOOOa & Colorado AIMM certificate)
GX-2012
The GX-2012 provides multiple tools in one instrument – confined space and safety monitoring, leak investigation, and underground Bar Hole leak surveying.
- Monitors ppm LEL, % volume methane, O2, CO and H2S
- 3 Operating Modes – Normal, leak check, and bar hole
- Visual/audible pulses change with gas concentration
- Internal sample drawing pump with up to 50’
- Vibration, visual, and audible alarms
- Lithium-ion or alkaline battery packs
- Intrinsically safe, ATEX/IECEx/CE or CSA/CE (Optional)
GX-3R
The GX-3R is the world’s smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker’s breathing zone. It monitors and displays LEL combustibles, 02, CO, and H2S.
- Small and lightweight 4 gas monitor
- 2-button operation
- Audible, visible, and vibration alarms
- Impact-resistant with removable rubber boot
- 25 hours of operation (Lithium-ion battery)
- 3-year warranty
GX-3R Pro
The GX-3R Pro is the world’s smallest 5 gas monitor weighing only 4.58 ounces and can comfortably be clipped within a worker’s breathing zone. In addition to monitoring standard confined space gases LEL, 02, CO, and H2S, the GX-3R Pro has a 5th channel where you can add infrared and toxic sensors.
- Small and lightweight 5 gas monitor
- 2-button operation
- Audible, visible, and vibration alarms
- Impact-resistant with removable rubber boot
- 25 hours of operation (Lithium-ion battery)
- 3-year warranty
Micro GC Fusion® Natural Gas/BTU Analyzer
Micro GC Fusion® Natural Gas Analyzer offers significant throughput gain for natural gas compositional analysis and BTU determination using gas chromatography (GC).
- Compositional analysis (mole%) of natural gas components
- BTU and other gas calculations according to ASTM and GPA methods.
- Can be used in the field (transportable) or at a stationary location such as an office or lab.
- Rapid analysis in 2-4 minutes. Low carrier gas consumption. Small size.
- Embedded GC software allows control from any computer browser. Simple to use.
- Optional external sample conditioner provides the ability to directly sample high-pressure gases up to 800psi
- Several configurations available
Eagle
The Eagle does more than just offer the standard confined space protection for LEL, O2, H2S, and CO.
- Simultaneous detection of up to 6 different gases
- Over 400 gas monitoring configurations
- Wide range of toxic gases
- PPM/LEL hydrocarbon detection
- Powerful long-life pump up to 125’ range with filters
- Up to 30 hours of continuous operation
- Intrinsically safe design, CSA (C/US) & UL classified (most versions)
Eagle 2
The Eagle 2 is a multi-gas detector that can monitor up to 6 different gases and offers easy access to control such as autocalibration, alarm silence, demand zero, peak hold, and methane elimination.
- Monitors up to 6 gases
- PPM, % LEL or % Vol. auto-ranging combustible detection
- Specialty sensors – PID (Photoionization Detector)
- Infrared CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC
- Thermal Conductivity (TC) % Vol. H2, % Vol. CH4
- Smart toxic, plug and play sensors NH3, AsH3, CI2, HCN, PH3, & SO2
- Hydrogen specific LEL/ppm sensor
- Powerful long-life pump up to 125’ range
- Alkaline 18 hours or NiMH 20 hours capability
- Intrinsically safe design, CSA approved
- Datalogging standard
03 Series
The 03 Series single gas monitors are designed for LEL, 02, H2S, or CO detection. This device can provide personal protection in hazardous areas at an affordable price.
- Available for LEL, O2, H2S, or CO
- Operates 3000 hours on alkaline (GP-03 up to 35 hours)
- Pocket size – 2.1” x 2.6” x 0.9” and 2.8 ounces
- Datalog from 5 to 300 hours
- Intrinsically safe, ATEX & CSA
- 3-year warranty H2S & CO
- 2-year warranty LEL & 02
Extrima® EX-certified Hydrogen Leak Detector
The portable Extrima® EX-certified Hydrogen Leak Detector is the ultimate intrinsically safe instrument for leak detection in the toughest environments.
- The highly sensitive, portable, and fast-acting Extrima is intrinsically safe for use in hazardous areas
- Robust enclosure and waterproof (IP 67) for demanding field use
- Fast recovery and battery operated (>7 hours per charge) to allow for efficient operation
FP-31
The FP-31 is a highly sensitive portable gas detector specific for formaldehyde detection, using a photoelectric photometry method that utilizes colorimetric tables for detection.
- Built-in sample draw pump
- Direct digital readout
- No false readings from interfering gases
- Operates on 4 “AA” batteries
- No warm up time
Gas Tracer
The Gas Tracer is a long-lasting confined space LEL gas detector. With up to 600 hours of data logging, this unit is perfect for testing and detecting small gas leaks in any scenario.
- Monitors ppm, LEL, % volume methane, O2, and CO
- “Leak tracker” audible/visual alarm mode for CH4 and CO
- 0 to 100% volume Methane option
- Barhole test mode
- Bump test reminder option
- Snap-logging – on-demand data recording
- Pump-pause on demand
- Internal sample drawing pump with up to 50-foot range
- Up to 600 hours of data logging with alarm trends
- Intrinsically safe
GasWatch 3
The GasWatch 3 is the world’s smallest and lightest single-gas monitor, protecting the user from oxygen deficiency, exposure to carbon monoxide, or exposure to hydrogen sulfide.
- 5 versions to choose from – CO, H2S, O2, CO/O2, or H2 compensated CO
- Over 4000 hours of operation
- Light and compact watch design
- Alligator clip with 360 rotation
- Vibration, visual, and audible alarms
- Water, dust, and radiofrequency resistant
- 3-year warranty
GX-2009
The GX-2009 is a very small and light 4-gas portable detector, weighing only 4.6 ounces, it fits in the palm of your hand.
- Simultaneous detection of 4 gases – LEL, 02, H2S, & CO
- Dual audible alarm ports, visible alarm LEDs, and vibration alarm
- IP-67 water-resistant, dustproof design, and impact resistant
- 20 hours of operation
- Intrinsically safe
GX-6000
The GX-6000 is capable of monitoring up to 6 gases – such as the standard 4 confined space gasses which include combustibles, 02, C0, and H2S as well as carbon tetrachloride, acrylonitrile, chloroform, methanol, refrigerants (R-143, R-132A), and more.
- PID gas monitor with simultaneous detection and display
- Capable of monitoring up to 6 gases at a time
- Multiple alarms including man-down alarm, a panic alarm, LED flashlight, and large auto rotating LCD display
- Dust and water-resistant enclosure with an IP-67 rating
GAS-Mate® Combustible Gas Leak Detector
GAS-Mate® Combustible Gas Leak Detector is an intrinsically safe tool that is ideal for locating leaks in natural gas, forming gas, flammable refrigerant, or combustible heating and appliance applications.
- The Gas-Mate is intrinsically safe and highly sensitive (down to 5 ppm)
- Detects multiple gases such as natural gas, forming gas, propane, butane, cyclopentane, ethane, ethanol, isobutane and ammonia
- No calibration is required for the Gas Mate
- Multiple LEDs, variable intensity audio alarm to indicate leak strength
CO Check® Carbon Monoxide Meter
CO Check® is a convenient, dependable way to detect and measure dangerous carbon monoxide (CO)1 in both residential and commercial/industrial applications.
- The CO Check provides best-in-class accuracy while detecting and measuring dangerous Carbon Monoxide
- Easy-to-use pushbuttons let you perform all functions with one hand
- Highly visible, intuitive “stoplight” LEDs and audible alarm give you quick indication of CO hazard
- Runs for 200 hours on 9V alkaline battery
