Doesn’t expecting the unexpected make the unexpected expected? This phrase is a play on words but there’s an underlying principle at play-in general, we can expect unforeseen circumstances or events … Read More

Maghorn Magnetic Locator is the ideal tool for locating and pinpointing buried ferrous objects. The Maghorn is designed for easy use, even in difficult areas where shrubs, underbrush, and weeds are in the way.

• Continuously variable sensitivity control
• One control and one-hand operation
• Lightweight and compact
• Cast aluminum body with a durable waterproof probe

[btn text="GET A QUOTE" link="#popmake-15701" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

The direct connect series gas sensors are highly reliable and very cost-effective for the detection of common gas hazards. The direct connect series are available for LEL, Oxygen, H2S, and CO.

• 3 Sensors, 1 explosion-proof housing
• Infrared sensors available for combustible gases
• Interfaces with Beacon 410 controller
• Available for LEL, O2, H2S, and CO
• Water repellent patented sensor coating
• Long-life sensors (2 + years typical)
• Also available with 2 or 4 sensors

[btn text="GET A QUOTE" link="#popmake-15548" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

The RM (Rig Monitoring) series of continuous gas monitors are specifically designed for detection of H2S around temporary drilling rigs. All units include a long-life plug-in electrochemical H2S sensor, range 0-100 ppm.

• H2S detection, 0-100 ppm range
• Explosion-proof enclosure
• Convenient mounting bracket
• Easily installed and moveable
• Battery clamps for easy connection
• Powerful horn and strobe

[btn text="GET A QUOTE" link="#popmake-15547" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The Digester gas monitor checks for all these gases on a cyclic basis.

• Corrosion resistant design
  • External construction for extreme environments
  • Internal construction for extreme samples
• Sample system for high humidity
• Accurately measure gas with high levels of H2S present
• Up to 4 sensors:
  • Methane % Vol.
  • CO2 % Vol.
  • Oxygen % Vol.
  • H2S 0-1000 PPM (0-3000 or 0-5000 optional)
• NEMA 4X enclosure
• Simple to operate

[btn text="GET A QUOTE" link="#popmake-15546" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

The SP-220 is a gas leak detector for combustible, toxic, freon, and fumigation gases.

• Simple to operate
• Long-life air aspirator (no moving parts)
• Extreme sample temperatures
• One or two sensors
• Inside/outside location options
• Corrosion resistant construction for extreme environments / samples
• Uses proven RKI technology
• Modular design easy to maintain
• Self-draining moisture trap
• Backflush for sample line

[btn text="GET A QUOTE" link="#popmake-15545" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

The Model 35-3001 series is a compact sample draw detector assembly with a built-in pump that is powered from 24VDC.

• Available in LEL, O2, H2S, CO, CO2, H2 (ppm or LEL)
• Multigas versions available with sensors in one enclosure
• Internal sample pump with 100’ range
• Flowmeter and LED’s for operational status
• Low flow indication
• NEMA 4X enclosure
• Operates on 24VDC input
• Optional 4-20mA output

[btn text="GET A QUOTE" link="#popmake-15544" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

The Model 1017 series is a compact sample draw direct connect LEL sensor assembly with a built-in pump that accepts a 24VDC input.

• Monitors 0-100% LEL
• Sample-draw with long life internal pump
• Cast aluminum alloy housing
• Stainless steel inlet and outlet fittings with flame arrestors
• Housing and flame arrestors CSA and UL classified for use in hazardous locations Class I, Division I, Groups B, C, & D.
• Also available for oxygen monitoring, 0-25% volume

[btn text="GET A QUOTE" link="#popmake-15543" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

The M Series H2S/CO transmitter is highly reliable and very cost-effective, with electronics protected inside a plastic enclosure to avoid damage from mechanical abuse, water, dust, or corrosion.

• Water/dust resistant housing
• Available for H2S and CO
• Long-life sensors (2 + years typical)
• Competitively priced
• Compact design

[btn text="GET A QUOTE" link="#popmake-15541" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More

The PS-2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long-lasting and low maintenance detection at the LEL or PPM levels of many gases or vapors.

• LEL or PPM detection ranges available for many gases
• Stand-alone system
• Input voltages: 115 VAC standard, 24 VDC or 48 VDC (optional)
• Audible and visual alarms
• Simple installation
• Low maintenance

[btn text="GET A QUOTE" link="#popmake-15540" tcolor="#ffffff" thovercolor="#ffffff"]

… Read More